Views:258 Author:Site Editor Publish Time: 2019-12-12 Origin:Site
What is the Water Fountain Pump?
About the special pump for the fountain, its outer casing and the over-current parts, the external parts are totally made of cast iron or stainless steel. Besides, the products retains the original pump-specific performance. The suction tube and pump must be filled with liquid before the pump is turned on. After the pump is turned on, the impeller rotates at a high speed, and the liquid rotates with the blade. Under the action of the centrifugal force, it flies outward from the impeller. The injected liquid gradually becomes slower in the diffusion chamber of the pump casing, the pressure gradually increases, and then the discharge pipe flows out from the pump outlet.
1. The fountain pump has its outer casing, over-current parts and external parts made of cast iron or stainless steel, and the product retains the original pump-specific performance. Use cast iron or stainless steel to improve the corrosion resistance of the pump. Its impeller uses a special material to prevent the impeller from loosening when the impeller is used.
2. Leakage protection measures: Use a constant potential grounding device. On the basis of the original ordinary pump, according to the requirements of the special pump for the fountain, the company has done many tests. With the continuously developed in technology, and the continuously improved on the processing materials. So that the special pump for the fountain can be started frequently, which is completely suitable for the use of the musical fountain.
3. The stainless steel fountain pump is an automatic water injection function.
4. The motor is self-circulating and water-cooled model.
The suction tube and pump must be filled with liquid before the pump is turned on. After the pump is turned on, the impeller will rotate at a high speed, and the liquid rotates with the blade. Under the action of the centrifugal force, it flies outward from the impeller, and the liquid that is ejected in the pump chamber diffuses slowly, the pressure gradually increase. Finally the liquid will flow out from the pump exit. At this time, at the center of the blade, the liquid is drawn to the surroundings to form a vacuum low-pressure zone with neither air nor liquid. The liquid in the liquid pool flows into the pump through the suction pipe. Under the action of the atmospheric pressure of the pool surface, the liquid is continuously sucked from the liquid pool and continuously flows out from the discharge pipe.
Small fountain submersible pumps are mainly used in fountain water supply, aquaculture and other places. Widely used in low-lift cities, farmland irrigation, sprinkler irrigation, industrial and civil supply, drainage systems, hills, mountain water diversion, and low-lying areas to exclude stagnant water.
As we all known that water fountain pump is the most important part of a fountain. If the pump gets damages, the water fountain can not work again. So we should maintain the pump frequently, which can promote the water fountain normal work.